by Markwell
The following tutorial will show you how to make one of my favorite bracelets. Making a paracord bracelet is easy and the following bracelet tutorial has been customized to be as easy as possible, so fear not! You will be able to replicate this beautiful bracelet with little effort and show it off!
The bracelet design is called a paracord shark jaw bone bracelet and is one of the most popular bracelets people make out of paracord. You will soon see why!
Now you know the name of the bracelet and had an up close look at it, you can decide weather to make one or k(not).
The bracelet will be made out of paracord 550 (found on Amazon). You will also need a lighter, a
pair of scissors and a lighter to melt the paracord ends. I recommend getting a bracelet buckle to help you get your bracelet on and off.
As you can see below, both bracelet ends are functional and are the inverse of the other side.
 | Paracord Planet 550lb Type III Paracord Combo Crafting Kits with Buckles (PARTY) Do you like to party? We like to party. Everyone loves to party! Which is why we hand picked this Party Combo to include 10 feet of the most party-licious colors we could think ... |
 | 10 - 3/8" Metal Side Release (Top Curved) Buckles (Chrome/Silver) For Paracord Bracelets The buckle is slightly larger than the 3/8" plastic buckle and smaller than the 1/2" buckle. |
 | 20 - 5/8"& 1/2" Black Side Release Buckles (10 Each) For Paracord Bracelets You will receive 10 each of the 5/8"& 1/2" black side release buckles. |
When making a paracord bracelet, you need to keep you knots consistent. This means you tighten them with equal strength. With these bracelet, I recommend you tighten the knots very firmly. Do not be afraid if it looks a bit weird when you start, it will all get into shape after a few more knots. If you would like to try any other designs, try my how to make a paracord bracelet page on Paracord central.
If anything seems off when making the bracelet, you can adjust the cords as you go.
Before you start and when you are finished, remember to melt the ends of the paracord. This will make it much easier for you to work with the cords.
Be careful not to injure yourself when using fire. Do not expose paracord to fire for very long, since it will darken because of the heat.
 | Paracord bracelet instructions: Popular bracelets explained A simple name for a simple book. Paracord bracelet instructions is a book designed to give you the paracord bracelet designs you need as the base upon which you can build. The b... |
 Paracord shark jaw bracelet |  step one |
 step 2 |  step three |
 step four |  step five |
 step six |  step seven |
 step eight |  step nine |
 step ten |  step eleven |
 step twelve |  step thirteen |
 step fourteen |  step fifteen |
 step sixteen |  step seventeen |
 step eighteen |  step nineteen |
 step twenty |  step twentyone |
 step twentytwo |  step twentythree |
 step twentyfour |  step twentyfive |
 step twentysix |  step twentyseven |
 step step twentyeight |
There we go! You should be all done. If you were not able to complete this tutorial for any reason, you can refer to the video below for additional help.
At this point I would like to thank you fore your time, I hope you enjoyed my tutorial!
In this article I will show you how to make a paracord zipper pull.
How to make a cross out of paracordThe following article shows you how to make a cross out of paracord 550.
Paracord zipper pull instructionson 02/13/2014
How to make a cross out of paracordon 12/24/2013
Learn how to make a paracord keychainon 07/21/2013
Braiding paracord the easy wayon 04/15/2013
What did you think of my tutorial?